
Choosing a Replacement Jaw for Your Crimp Tool
In this article, you will find which dies can also be installed on the current IWISS crimp tool you have.
Style 1. Die Sets for SN Series Crimper
Jaw Part.No | Capacity/AWG | Craft | Application | If Exchangeable | |
![]() |
28B | 0.1-1.0mm2 / AWG28-18 | EDM | Non-Insulated Terminals | Y |
![]() |
48B | 0.14-1.5mm2 / AWG26-16 | CAST | Non-Insulated Terminals | Y |
![]() |
02C | 0.25-2.5mm2 / AWG24-20 | CAST | Insulated Terminals | Y |
![]() |
2549 | 0.08-0.5/0.25/0.5/1.0mm2 / AWG28-18 | EDM | Non-Insulated Terminals | Y |
![]() |
2546B | 2.5/4/6.0mm2/ AWG13-10 | EDM | Solar PV Connectors | Y |
![]() |
01BM | 0.08-0.5mm2 / AWG28-20 | EDM | Non-Insulated Terminals | N |
![]() |
06 | 0.5-6.0mm2 / AWG20-10 | CAST | Non-Insulated Terminals | Y |
![]() |
0325 | 0.5-2.5mm2 / AWG20-13 | CAST | Non-Insulated Terminals | Y |
![]() |
02WF2C | 0.5-2.5mm2 / AWG20-13 | CAST | Insulated Terminals and Cable End-sleeves | Y |
![]() |
06WF | 0.25-6.0mm2 / AWG24-10 | CAST | Insulated and Non-Insulated Cable End-sleeves | Y |
Style 2. Die Sets for LY Series Crimper
Jaw Part.No | Capacity/AWG | Craft | Application | If Exchangeable | |
![]() |
30J | 0.5-6.0mm2 / AWG22-10 | CAST | For cable end-sleeves and insulated terminals | Y |
![]() |
05FL | 4.8-6.3mm2 | EDM | For flag type receptacles | Y |
![]() |
101 | 1.5-10mm2 / AWG16-8 | CAST | For non-insulated terminals | Y |
![]() |
1016 | 0.5-16mm2 / AWG20-8 | CAST | For non-insulated terminals | Y |
![]() |
04WF | 1-6.0mm2 / AWG20-10 | CAST | For insulated and non-insulated cable end-sleeves | Y |
![]() |
35WF | 10-35mm2 / AWG8-2 | CAST | For insulated and non-insulated cable end-sleeves | Y |
![]() |
2048 | Max.Dia 8.5mm | CAST | For Spark Plug Terminals | N |
Style 3. Die Sets for HS Series Crimper
Jaw Part.No | Capacity/AWG | Craft | Application | If Exchangeable | |
![]() |
30J | 0.5-6.0mm2 / AWG22-10 | CAST | For cable end-sleeves and insulated terminals | Y |
![]() |
05FL | 4.8-6.3mm2 | EDM | For flag type receptacles | Y |
![]() |
101 | 1.5-10mm2 / AWG16-8 | CAST | For non-insulated terminals | Y |
![]() |
1016 | 0.5-16mm2 / AWG20-8 | CAST | For non-insulated terminals | Y |
![]() |
04WF | 1-6.0mm2 / AWG20-10 | CAST | For insulated and non-insulated cable end-sleeves | Y |
![]() |
35WF | 10-35mm2 / AWG8-2 | CAST | For insulated and non-insulated cable end-sleeves | Y |
Style 4. Die Sets for AP Series Crimper
Can i use 28b or 48b dies with hs30j ap crimper?
No. 28B and 48b are for JN series crimpeR – see chart above for dies for hs series