SN-48B Ratchet Terminal Crimping Plier for AWG26-16 Terminals

  • Awg: 26-16
  • Material: High-carbon steel
  • Crimping capacity: 0.14-1.5M㎡
  • Used for DuPont & jst-sm Molex connectors and pins
  • For 3.96/4.8/5.08/6.3 mm grounding terminal connectors

Product description

SN-48B Ratchet Terminal Crimp Tool for Uninsulated Receptacles and Wide Terminals(0.14-1.5mm2) AWG 26-16

SN-48B ratchet terminal crimping tool is used for DuPont & jst-sm Molex connectors and pins. For 3.96/4.8/5.08/6.3 mm grounding terminal connectors.

This crimping tool can be used to crimp both male and female crimp pins onto 16-26 AWG wires to make custom cables. The tool offers ratcheting action for increased consistency and ease of use.


Using the Crimper

(1). Grasping the tool in your left hand with the lettering visible and facing toward you, but upside down.
(2). Position the connector in one of the three slots, and the “wings” are facing down.
(3). Close the tool slightly until the ratchet just engages and grasps the connector.
(4). Squeeze the ratchet and it will open after this step. Connector should have successfully crimped on to the wire.



Model Number: SN-48B

Material: High-carbon steel

Crimping Capacity: 0.14-1.5mm2

AWG: 26-16AWG

Length : 190mm / 7.5inches

Weight : 0.35kg /  0.8lbs

Additional information

Weight 0.38 kg
Dimensions 30 × 10 × 4 cm
Ask about this Product