iCrimp IWS-1234C F1807 1/2″&3/4″ Combo Angle Copper Ring Crimper Tool Kit

Product description

IWISS F1807 1/2″&3/4″ Combo Angle Copper Ring Crimper Tool Kit

With free Copper Rings & iCrimp® Cutter & GO-NO-GO Gauge  – Portable Case

Suits Sharkbite, Watts, Apollo and All US F1807 Standards.

– Meet ASTM F1807.
– Combo Crimping Tool for 1/2-inch and 3/4-inch.
– Smart design help you reach into tight connection and make the pipe installation easier.
– Sharpen save 30% labor.
– Perfect Locator and Perfect polishing insure no damage for copper ring.

Simply pull back on the handles to open the jaws and crimp away.

What you will receive in one IWS-1234W tool kit:

1* 1/2″ & 3/4″ Combo Crimping Tool
20 PCS * 1/2″ Copper Ring
10 PCS * 3/4″ Copper Ring
1* iCrimp® PEX Pipe Cutter (Max 1 inch) 1* GO NO GO Gauge
1* Plastic Suitcase

Whole Set Weight: 1.8 KG / 4 pounds
Product Dimensions: 34.8 x 20.3 x 5.1 cm / 13.7 x 8 x 2 inches
Single Crimpter Weight: 0.95 KG / 2.11 pounds
Single Crimpter Length: 19 cm / 7.5 inches

Operation Instruction

How to use the IWS-1234C crimpter:

Step 1 Pull back on the moving handle and open the jaws fully.

Step 2 Position jaws squarely around the copper ring.

Step 2 Position jaws squarely around the copper ring.

Step 4 Measure the crimped ring with GO-NO/GO gauge.

Calibration Instruction

How to calibration the IWS-1234C crimpter:

Step 1 Remove “C” clamp with screwdriver.

Step 2 Push and rotate pin-increase by single increment only.

Step 3 Replace “C” clamp with plier.