SN-48B Ratchet Terminal Crimping Tool for AWG26-16 Terminals
- Awg: 26-16
- Material: High-carbon steel
- Crimping capacity: 0.14-1.5M㎡
- Used for DuPont & jst-sm Molex connectors and pins
- For 3.96/4.8/5.08/6.3 mm grounding terminal connectors
SN-48B Ratchet Terminal Crimping Tool for Uninsulated Receptacles and Wide Terminals(0.14-1.5mm2) AWG 26-16
SN-48B ratchet terminal crimping tool is used for DuPont & jst-sm Molex connectors and pins. For 3.96/4.8/5.08/6.3 mm grounding terminal connectors.
This crimping tool can be used to crimp both male and female crimp pins onto 16-26 AWG wires to make custom cables. The tool offers ratcheting action for increased consistency and ease of use.
Using the Crimping Tool
(1). Grasping the tool in your left hand with the lettering visible and facing toward you, but upside down.
(2). Position the connector in one of the three slots, and the “wings” are facing down.
(3). Close the tool slightly until the ratchet just engages and grasps the connector.
(4). Squeeze the ratchet and it will open after this step. Connector should have successfully crimped on to the wire.
Model Number: SN-48B
Material: High-carbon steel
Crimping Capacity: 0.14-1.5mm2
Length : 190mm / 7.5inches
Weight : 0.35kg / 0.8lbs
|Dimensions||30 × 10 × 4 cm|